NETBUS IE FM5P2S HIGH FLEX - Industrial Ethernet™ Cat.5e

S/UTP PUR 2x2x26/19AWG Cat. 5e

Dynamic (torsion) application, indoor/outdoor limited use

P/N: 0502295



Conductor: stranded bare copper wires – sez. 0,15mm² (26/19AWG)

Insulation: foam-skin polyethylene – diam. 1,00mm

Insulation colors: white-orange; orange; white-green; green

Pairs assembly: cores twisted to pairs

Global assembly: pairs stranded together with fillers (if needed)

Inner jacket: TPE-V halogen free, not corrosive – diam. 4,20mm


  • tinned copper wire braid – nom. coverage 85%

Outer jacket: PUR flame retardant and halogen free – Blue RAL 5021

Outer diam.: 5,9



Max DC conductor resistance: 142Ω/km

Capacitance C/C (@800Hz): 50 pF/m

Characteristic impedance: 100 Ω (±15%)

Propagation velocity: 74%

Insulation resistance: ≥ 5,0 GΩxkm

Dielectric test voltage: 1,0 kVac /1 min (core/core); 1,0 kVac /1 min (core/shield)


Flame retardant acc. with std. UL 1581 § 1090 and § 1100 (FT2)

Determination of the amount of halogen acid gas acc. with std. EN 50267-2-1 e IEC 60754-1

Heat release: 729 MJ/km (0,202 kWh/m)


UL/CSA: insulation acc. with AWM Style 11117 – 1000V/80°C; jacket acc. with AWM Style 21576 – 1000V/80°C


Temperature rating: -40°C / +80°C (fixed use); -30°C / +70°C (dynamic use)

Min. bending radius: 8 x Ø [mm] (fixed use); 15 x Ø [mm] (dynamic use)

Max. translation speed (drag chain): 3,0 m/s (subject to correct installation)

Max. acceleration (drag chain): 3,0 m/s² (subject to correct installation)

Max length (drag chain): 5m

Max. torsion: ± 180°/m (subject to correct installation)

Standard reference: EN 50288-2-2; EN 61156-3

Resistance to oils: acc. with std. IEC 60811-2-1; ASTM IRM 901, IRM 902; DIN VDE 0472-803; ICEA S-82-552

Resistance to muds: acc. with std. NEK 606

Resistance to ozone: acc. with std. EN 50396

Resistance to microbes: acc. with std. VDE 0282/10

Good resistance to saturated hydrocarbons (diesel, kerosene, petrol ether)

Technical documents

Technical datasheet

Scroll to Top