NETBUS IE LANFIRE PH120 Cat.7 - Ethernet™ Fire Resistant Cable Cat.7

S/FTP FRNC-LSZH 4x2xAWG22/1 Cat. 5e

Fixed application, indoor use

P/N: 0502870



Conductor: solid bare copper wire – sez. 0,34mm² (22/1AWG)

Insulation: polyolefin – compatible with RJ45 connectors

Insulation colors: white (x4); blue; orange; green; brown

Special separation: each insulation is wrapped with a special mineral/glass tape (anti-fire barrier)

Core assembly: cores stranded to pairs

Pair separation: each pair is wrapped with a special mineral/glass tape (anti-fire barrier)

Individual pair shield: pairs singularly wrapped with metal tape

Global assembly: singularly shielded pairs are stranded together

Global shielding: bare copper wire braid – nom. coverage 60%

Outer jacket: LSZH flame retardant not corrosive – Red RAL 3000

Outer diam.: 10,6 mm



Max DC conductor resistance: 59,4Ω/km

Capacitance C/C (@800Hz): 54 pF/m

Characteristic impedance: 100 Ω (±15%)

Propagation velocity: 65% @ 100MHz

Insulation resistance: ≥ 5,0 GΩxkm

Dielectric test voltage: 1,0 kVac /1 min

Operating voltage: max 125Vac



Flame retardant acc. with std. IEC 60332-1

Fire retardant acc. with std. IEC 60332-3-24

Fire resistant acc. with:

  • std. EN 50200 (if applicable): test voltage 125Vac PH120 acc. with std. EN 50289-4-16
  • std. EN50289-4-16: data signal rating PH120

Determination of the amount of halogen acid gas acc. with std. EN 50267-2-1 e IEC 60754-1

Determination of degree of acidity of gases acc. with std. EN 50267-2-2 e IEC 60754-2

Heat release (approx.): 1230 MJ/km (0,341 kWh/m)



Patented construction: REG. NO. EP3459085B1



Temperature rating: -20°C / +70°C

Standard reference: IEC 61156-5; EN 50288-4-1; EN50289-4-16; ISO/IEC 11801; EN 50173; EN 50200

Max. pulling force: 200N

Technical documents

Technical datasheet

Scroll to Top