NETBUS L2/FIP H24 - Profibus™ DP Cable

S/FTP LSZH 1x2x24/7AWG

Dynamic (drag chain) application, indoor use

P/N: 0502495

 

CONSTRUCTION

Conductor: stranded bare copper wires – sez. 0,23mm² (24/7AWG)

Insulation: foam-skin polyethylene – diam. 2,4mm

Insulation colors: red; green

Core assembly: twisted to a pair with fillers (if needed)

Separation: non-woven PET/PA tape with overlap

Shielding:

  • AL/PET tape with overlap – AL surface outside
  • tinned copper wire braid – nom. coverage 85%

Outer jacket: LSZH flame retardant, halogen free and not corrosive – Violet RAL 4001

Outer diam.: 7,8 (±0,2) mm

Properties

ELECTRICAL AND TRANSMISSION PROPERTIES

Capacitance (@800Hz): 29 pF/km

Characteristic impedance: 270 Ω (±10%) @9,6 kHz; 185 Ω (±10%) @38,4 kHz; 150 Ω (±10%) @3÷20 MHz

Propagation velocity: 78%

Insulation resistance: ≥ 5,0 GΩxkm

Dielectric test voltage: 1,0 kVac /1 min (core/core); 1,0 kVac /1 min (core/shield)

Operating voltage: 250 V

 

FIRE PERFORMANCES

Flame retardant acc. with std. IEC 60332-1-2

Determination of the amount of halogen acid gas acc. with std. EN 50267-2-1 e IEC 60754-1

Determination of degree of acidity of gases acc. with std. EN 50267-2-2 e IEC 60754-2

Heat release: 923 MJ/km (0,256 kWh/m)

 

OTHER PROPERTIES

Temperature rating: -30°C / +80°C (posa fissa); -20°C / +70°C (posa flessibile)

Min. bending radius: 8 x Ø [mm] (fixed use); 10 x Ø [mm] (dynamic use)

Max. pulling force: 100N

Standard reference: IEC 61158; EN 50170-2; EIA RS485

Technical documents

Technical datasheet

Scroll to Top