NETBUS L2/FIP PCB24M - Profibus™ DP Hybrid

S/FTP PUR 1x2x24/19AWG + 3×1,0mm² Hybrid

Dynamic (drag chain) application, indoor/outdoor limited use




Data element

Conductor: stranded bare copper wires – sez. 0,25mm² (24/19AWG)

Insulation: foam-skin polyethylene – diam. 2,50mm

Insulation colors: red; green

Core assembly: twisted to a pair with fillers (if needed)

Separation: non-woven PET/PA tape with overlap


  • AL/PET tape with overlap – AL surface outside
  • tinned copper wire braid – nom. coverage 85%

Separation: polypropylene (PP) tape with overlap


Power element

Conductor: stranded bare copper wires – sez. 1,00mm² (18/56AWG)

Insulation: foam-skin polyethylene – diam. 1,80mm

Insulation colors: green/yellow; blue; black



Global assembly: data pair and power supply cores stranded together with fillers (if needed)

Separation: non-woven PET/PA tape with overlap

Outer jacket: PUR flame retardant and halogen free – violet RAL 4001

Outer diam.: 10,0 (±0,3) mm



Max DC conductor resistance (power elem.): 19,5 Ω/km

Capacitance (@800Hz) (data elem.): 29 pF/m (core/core)

Characteristic impedance: 270 Ω (±10%) @9,6 kHz; 185 Ω (±10%) @38,4 kHz; 150 Ω (±10%) @3÷20 MHz

Propagation velocity: 78%

Insulation resistance: ≥ 5,0 GΩxkm

Dielectric test voltage: 1,5 kVac /5 min (core/core); 1,5 kVac /5 min (core/shield)

Operating voltage: 250 V



Flame retardant acc. with std. IEC 60332-1-2

Determination of the amount of halogen acid gas acc. with std. EN 50267-2-1 and IEC 60754-1



Temperature rating: -40°C / +80°C (fixed use); -30°C / +70°C (dynamic use)

Max. translation speed (axial drag chain): 4,0 m/s (subject to correct installation)

Max. acceleration (axial drag chain): 4,0 m/s² (subject to correct installation)

Max length (drag chain): 5m

Min. bending radius: 8 x Ø [mm] (fixed use); 15 x Ø [mm] (dynamic use)

Max. pulling force: 200N

Resistenza agli oli: secondo std. IEC 60811-2-1; ASTM IRM901 e IRM902; ICEA S-82-552

Resistenza agli UV: secondo std. UL 1581 §1200

Resistenza ai fanghi: secondo std. NEK 606

Resistenza all’ozono: secondo std. EN 50396

Resistenza ai microbi: secondo std. VDE 0282/10

Buona resistenza agli idrocarburi saturi (diesel, kerosene, petrol ether)

Technical documents

Scheda tecnica

Torna su